Sep 19, 2025 Остави поруку

Цев са 3-слојевом полипропиленом (3ЛПП)

3ЛПЕ пресвучена челична цевИлиТри - слој полиетилена челичне цеви, Је врста корозије - отпорног на цевовода широко коришћена у индустријама као што су уље, природни гас, хемијско инжењерство и водоснабдевање.

 

Примена премаза:

Припрема површине цеви чишћењем песка (ССПЦ - СП10 / НАЦЕ НО.2 / ИСО 8501-1 СА2 1 / 2 / СИС 05 59 00)

Следећи за цеви загревање фузије епоксидни прах ће се примењивати

Екструдирани лепак се наноси преко цеви.

Коначно екструдирани слој полипропилена (МДПП или ХДПП) примењује се преко лепилног слоја.

Укупна дебљина премаза је генерално <3,0 мм за цев Диа <24 "и 3,3 мм за цеви од 32" и више)

 

Image result for Three Layer Poly Ethylene/ Propylene (3LPE/ 3LPP) coating 3LPE/ 3LPP coating system is a multilayer coating composed of three functional components: a high performance fusion bonded epoxy (FBE), followed by a copolymer adhesive and an outer layer of Medium Density Polyethylene (MDPE) or High Density Polyethylene (HDPE), which provides protection against external corrosion. The codes and standards for 3LPE are ISO 21809-1, DIN 30670 or CAN/CSA Z245.21. Fusion Bonded Epoxy (FBE): First layer of FBE shall be 150 microns thick. Adhesive: Second layer of extruded co-polymer adhesive, 200 microns thick. Polyethylene (MDPE/HDPE): Third layer of extruded polyethylene (MDPE/HDPE) or polypropylene (MDPP/HDPP), 1.6 – 2.95 mm thick. Application of Coating: Surface preparation of pipe by blast cleaning, subsequent to pipe heating fusion epoxy powder shall be applied and after that extruded adhesive shall be applied over the pipe. Finally extruded polyethylene (MDPE or HDPE) layer shall be applied over the adhesive layer. Total coating thickness is generally < 3.0 mm for pipe dia < 24

Контактирајте нас заЧелична цев за прекривање 3ЛППpipes@gneetube.com

Pošalji upit

whatsapp

Telefon

E-pošta

Istraga